View FOD8320_6953175.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin ?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 may 2012 FOD8320 high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin features fairchild? optoplanar packaging technology provides reliable and high voltage insulation with greater than 10mm creepage and clearance distance, and 0.5mm internal insulation distance while still offering a compact footprint 2.5a output current driving capability for medium power igbt/mosfet ? use of p-channel mosfets at output stage enables output voltage swing close to the supply rail 35kv/? minimum common mode rejection wide supply voltage range from 15v to 30v fast switching speed over full operating temperature range ? 400ns max. propagation delay ? 100ns max. pulse width distortion undervoltage lockout (uvlo) with hysteresis extended industrial temperate range, -40 to 100? temperature range safety and regulatory approvals ? ul1577, 5,000v rms for 1 min. ? din en/iec60747-5-5, 1,414v peak working insulation voltage applications ac and brushless dc motor drives industrial inverter uninterruptible power supply induction heating isolated igbt/power mosfet gate drive related resources fod3120, high noise immunity, 2.5a output current, gate drive optocoupler datasheet description the FOD8320 is a 2.5a output current gate drive optocoupler, capable of driving medium power igbt/ mosfets. it is ideally suited for fast switching driving of power igbt and mosfets used in motor control inverter applications, and high performance power systems. it utilizes fairchild? coplanar packaging technology, optoplanar , and optimized ic design to achieve reliably high insulation voltage and high noise immunity. it consists of a aluminum gallium arsenide (algaas) light emitting diode optically coupled to an integrated circuit with a high-speed driver for push-pull mosfet output stage. the device is housed in a wide body 5-pin small outline plastic package. functional schematic 1 3 6 5 4 anode cathode v ss v o v dd
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 2 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin truth table pin definitions pin configuration led v dd v ss ?ositive going (turn-on) v dd v ss ?ositive going (turn-off) v o off 0v to 30v 0v to 30v low on 0v to 11.5v 0v to 10v low on 11.5v to 14.5v 10v to 13v transition on 14.5v to 30v 13v to 30v high pin # name description 1 anode led anode 3 cathode led cathode 4v ss negative supply voltage 5v o output voltage 6v dd positive supply voltage 1 3 6 5 4 anode cathode v ss v o v dd
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 3 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin safety and insulation ratings as per din en/iec60747-5-5. this optocoupler is suitable for ?afe electrical insulation?only within the safety limit data. compliance with the safety ratings shall be ensured by means of protective circuits. symbol parameter min. typ. max. unit installation classi?ations per din vde 0110/1.89 table 1 for rated mains voltage < 150vrms i?v for rated mains voltage < 300vrms i?v for rated mains voltage < 450vrms i?iii for rated mains voltage < 600vrms i?ii climatic classi?ation 40/100/21 pollution degree (din vde 0110/1.89) 2 cti comparative tracking index 175 v pr input to output test voltage, method b, v iorm x 1.875 = v pr , 100% production test with t m = 1 sec., partial discharge < 5pc 2651 input to output test voltage, method a, v iorm x 1.5 = v pr , type and sample test with t m = 60 sec.,partial discharge < 5 pc 2121 v iorm max working insulation voltage 1,414 v peak v iotm highest allowable over voltage 6000 v peak external creepage 10.0 mm external clearance 10.0 mm insulation thickness 0.5 mm safety limit values ?maximum values allowed in the event of a failure t s case temperature 150 ? i s,input input current 200 ma p s,output output power 600 mw r io insulation resistance at t s , v io = 500v 10 9
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 4 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin absolute maximum ratings (t a = 25? unless otherwise speci?d) stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. notes: 1. maximum pulse width = 10?, maximum duty cycle=0.2%. 2. no derating required across operating temperature range. 3. derate linearly from 25? at a rate of 5.2mw/? 4. functional operation under these conditions is not implied. permanent damage may occur if the device is subjected to conditions outside these ratings. recommended operating conditions the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. fairchild does not recommend exceeding them or designing to absolute maximum ratings. symbol parameter value units t stg storage temperature -40 to +125 ? t opr operating temperature -40 to +100 ? t j junction temperature -40 to +125 ? t sol lead solder temperature (refer to re?w temperature pro?e) 260 for 10 sec ? i f(avg) average input current 25 ma f operating frequency 50 khz v r reverse input voltage 5.0 v i o(peak) peak output current (1) 3.0 a v dd supply voltage 0 to 35 v v o(peak) peak output voltage 0 to v dd v t r(in) , t f(in) input signal rise and fall time 500 ns pd i input power dissipation (2)(4) 45 mw pd o output power dissipation (3)(4) 500 mw symbol parameter min. max. unit t a ambient operating temperature -40 100 ? v dd ?v ss supply voltage 16 30 v i f(on) input current (on) 716ma v f(off) input voltage (off) 0 0.8 v
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 5 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin isolation characteristics apply over all recommended conditions, typical value is measured at t a = 25? notes: 5. device is considered a two terminal device: pins 1 and 3 are shorted together and pins 4, 5 and 6 are shorted together. 6. 5,000 vac rms for 1 minute duration is equivalent to 6,000 vac rms for 1 second duration. electrical characteristics apply over all recommended conditions, typical value is measured at v dd = 30v, v ss = ground, t a = 25? unless otherwise speci?d. notes: 7. in this test, v oh is measured with a dc load current of 100ma. when driving capacitive load v oh will approach v dd as i oh approaches zero amps. 8. maximum pulse width = 1ms, maximum duty cycle = 20%. symbol parameter conditions min. typ. max. units v iso input-output isolation voltage t a = 25?, r.h. < 50%, t = 1.0min, i i-o 20?, 50hz (5)(6) 5,000 v rms r iso isolation resistance v i-o = 500v (5) 10 11 c iso isolation capacitance v i-o = 0v, freq = 1.0mhz (6) 1pf symbol parameter conditions min. typ. max. units figure v f input forward voltage i f = 10ma 1.1 1.5 1.8 v 16 (v f / t a ) temperature coef?ient of forward voltage -1.8 mv/? bv r input reverse breakdown voltage i r = 10? 5 v c in input capacitance f = 1mhz, v f = 0v 60 pf i oh high level output current (1) v oh = v dd ?3v 1.0 2.0 2.5 a 1, 3 v oh = v dd ?6v 2.0 2.5 a 1, 3, 19 i ol low level output current (1) v ol = v ss + 3v 1.0 2.0 2.5 a 4, 6 v ol = v ss + 6v 2.0 2.5 a 4, 6, 18 v oh high level output voltage (7)(8) i f = 10ma, i o = -2.5a v dd ?6.25 v dd ?2.5 v 1 i f = 10ma, i o = -100ma v dd ?0.5 v dd ?0.1 1, 2, 20 v ol low level output voltage (7)(8) i f = 10ma, i o = 2.5a v ss + 2.5 v ss + 6.25 v 4 i f = 0ma, i o = 100ma v ss + 0.1 v ss + 0.5 5, 21 i ddh high level supply current v o open, i f = 7 to 16ma 2.9 3.8 ma 7, 8, 22 i ddl low level supply current v o open, v f = 0 to 0.8v 2.8 3.8 ma 7, 8, 23 i flh threshold input current low to high i o = 0ma, v o > 5v 2.4 5.0 ma 9, 15, 24 v fhl threshold input voltage high to low i o = 0ma, v o < 5v 0.8 v 25 v uvlo+ undervoltage lockout threshold i f = 10ma, v o > 5v 11.5 12.7 14.5 v 17, 26 v uvlo- i f = 10ma, v o < 5v 10.0 11.2 13.0 v 17, 26 uvlo hys undervoltage lockout threshold hysteresis 1.5 v
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 6 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin switching characteristics apply over all recommended conditions, typical value is measured at v dd = 30v, v ss = ground, t a = 25? unless otherwise speci?d. notes: 9. t phl propagation delay is measured from the 50% level on the falling edge of the input pulse to the 50% level of the falling edge of the v o signal. 10. t plh propagation delay is measured from the 50% level on the rising edge of the input pulse to the 50% level of the rising edge of the v o signal. 11. pwd is defined as | t phl ?t plh | for any given device. 12. the difference between t phl and t plh between any two FOD8320 parts under same operating conditions, with equal loads . 13. common mode transient immunity at output high is the maximum tolerable negative dvcm/dt on the trailing edge of the common mode impulse signal, vcm, to assure that the output will remain high (i.e. v o > 15.0v). 14. common mode transient immunity at output low is the maximum tolerable positive dvcm/dt on the leading edge of the common pulse signal, vcm, to assure that the output will remain low (i.e. v o < 1.0v). symbol parameter conditions min. typ. max. units figure t phl propagation delay time to logic low output (9) i f = 7ma to 16ma, rg = 10 , cg =10nf, f = 10khz, duty cycle = 50% 150 285 400 ns 10, 11, 12, 13, 14, 27 t plh propagation delay time to logic high output (10) 150 260 400 ns 10, 11, 12, 13, 14, 27 pwd pulse width distortion (11) |t phl ?t plh | 25 100 ns pdd (skew) propagation delay difference between any two parts (12) -250 250 t r output rise time (10% to 90%) 60 ns 27 t f output fall time (90% to 10%) 60 ns 27 t ulvo on ulvo turn on delay i f = 10ma, v o > 5v 0.8 ? t ulvo off ulvo turn off delay i f = 10ma, v o < 5v 0.4 ? |cm h | common mode transient immunity at output high t a = 25?, v dd = 30v, i f = 7 to 16ma, v cm = 2000v (13) 35 50 kv/? 28 |cm l | common mode transient immunity at output low t a = 25?, v dd = 30v, v f = 0v, v cm = 2000v (14) 35 50 kv/? 28
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 7 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin typical performance characteristics i oh ?output high current (a) figure 3. output high current vs. ambient temperature 8 7 6 5 4 3 2 1 0 -40 -20 0 20 40 60 80 100 t a ?ambient temperature ( c) v o = v dd ?6v v o = v dd ?3v v ol ?output low voltage (v) 0.25 0.20 0.15 0.10 0.05 0 figure 5. output low voltage vs. ambient temperature -40 -20 0 20 40 60 80 100 t a ?ambient temperature ( c) v oh ?v dd ?output high voltage drop (v) 0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 figure 1. output high voltage drop vs. output high current 0 0.5 1.0 1.5 2.0 2.5 i oh ?output high current (a) v dd = 15v to 30v v ss = 0v i f = 7ma to 16ma f = 200hz 0.2% duty cycle t a = -40 c 25 c 100 c v ol ?output low voltage (v) 4 3 2 1 0 figure 4. output low voltage vs. output low current 0 0.5 1.0 1.5 2.0 2.5 i ol ?output low current (a) -40 c 25 c t a = 100 c v oh ? dd ?output high voltage drop (v) figure 2. output high voltage drop vs. ambient temperature 0 -0.05 -0.10 -0.15 -0.20 -0.25 -0.30 -40 -20 0 20 40 60 80 100 t a ?ambient temperature ( c) v dd = 15v to 30v v ss = 0v i f = 7ma to 16ma i o = -100ma v dd = 15v to 30v v ss = 0v i f = 7ma to 16ma f = 200hz 0.2% duty cycle v dd = 15v to 30v v ss = 0v v f = 0v or 0.8v i o = 100ma v dd = 15v to 30v v ss = 0v i f = 0ma f = 200hz 99.8% duty cycle i ol ?output low current (a) 8 6 4 2 0 figure 6. output low current vs. ambient temperature -40 -20 0 20 40 60 80 100 t a ?ambient temperature ( c) v dd = 15v to 30v v ss = 0v i f = 0a f = 200hz 99.8% duty cycle v o = v ss + 6v v o = v ss + 3v
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 8 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin typical performance characteristics (continued) i dd ?supply current (ma) 3.6 3.2 2.8 2.4 2.0 figure 7. supply current vs. ambient temperature -40 -20 0 20 40 60 80 100 t a ?ambient temperature ( c) v dd = 30v v ss = 0v i f = 10ma (for i ddh ) i f = 0ma (for i ddl ) i ddh i ddl i flh ?low to high input current threshold (ma) 4 3.5 3.0 2.5 2.0 1.5 1.0 figure 9. low to high input current threshold vs. ambient temperature -40 -20 0 20 40 60 80 100 t a ?ambient temperature ( c) v dd = 15v to 30v v ss = 0v output = open i dd ?supply current (ma) 3.6 3.2 2.8 2.4 2.0 figure 8. supply current vs. supply voltage 15 20 25 30 v dd ?supply voltage (v) i f = 10ma (for i ddh ) i f = 0ma (for i ddl ) v ss = 0v t a = 25 c i ddh i ddl t p ?propagation delay (ns) 500 400 300 200 100 figure 10. propagation delay vs. supply voltage 15 18 21 24 27 30 v dd ?supply voltage (v) i f = 10ma r g = 10 c g = 10nf t a = 25 c t phl t plh figure 12. propagation delay vs. ambient temperature -40 -20 0 20 40 60 80 100 t a ?ambient temperature ( c) t p ?propagation delay (ns) 500 400 300 200 100 t p ?propagation delay (ns) 500 400 300 200 100 figure 11. propagation delay vs. led forward current 6 8 10 12 14 16 i f ?forward led current (ma) t phl t phl t plh t plh v dd = 30v v ss = 0v f = 10khz 50% duty cycle r g = 10 c g = 10nf t a = 25 c v dd = 30v v ss = 0v i f = 10ma f = 10khz 50% duty cycle f = 10khz 50% duty cycle r g = 10 c g = 10nf
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 9 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin typical performance characteristics (continued) v o ?output voltage (v) 14 12 10 8 6 4 2 0 figure 17. under voltage lockout 0 5 10 15 20 v dd ? ss ?supply voltage (v) i f = 10ma t a = 25 c t p ?propagation delay (ns) 500 400 300 200 100 figure 13. propagation delay vs. series load resistance 0 1020304050 r g ?series load resistance ( ) t plh v dd = 30v v ss = 0v i f = 10ma f = 10khz 50% duty cycle c g = 10nf t a = 25 c t phl t p ?propagation delay (ns) 500 400 300 200 100 figure 14. propagation delay vs. load capacitance 0 20406080100 c g ?load capacitance (nf) t plh v dd = 30v v ss = 0v i f = 10ma f = 10khz 50% duty cycle r g = 10 t a = 25 c t phl v o ?output voltage (v) 35 30 25 20 15 10 5 0 figure 15. transfer characteristics 012345 i f ?forward led current (ma) v dd = 30v t a = 25 c i f ?forward current (ma) 100 10 1 0.1 0.01 0.001 figure 16. input forward current vs. forward voltage 0.6 0.8 1.0 1.2 1.4 1.6 1.8 v f ?forward voltage (v) 100 c 25 c -40 c v uvlo = 11.56v v uvlo = 13.12v
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 10 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin test circuit figure 18. i ol test circuit figure 19. i oh test circuit + + power supply v dd = 15v to 30v power supply v = 6v i ol pw = 4.99ms period = 5ms r out = 50 r2 100 frequency = 200hz duty cycle = 99.8% v dd = 15v to 30v v ss = 0v i f = 0ma c1 0.1 f pulse-in led-ifmon pulse generator test conditions: to scope v ol r1 100 c2 47 f + c3 0.1 f d1 c4 47 f + 1 3 6 5 4 pw = 10 s period = 5ms r out = 50 r2 100 frequency = 200hz duty cycle = 0.2% v dd = 15v to 30v v ss = 0v i f = 7ma to 16ma c1 0.1 f pulse-in led-ifmon pulse generator test conditions: power supply v dd = 15v to 30v + + power supply v = 6v to scope v oh r1 100 c2 47 f + c3 0.1 f d1 current probe i oh c4 47 f + 1 3 6 5 4
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 11 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin test circuit (continued) figure 20. v oh test circuit figure 21. v ol test circuit i f = 7 to 16ma v o 0.1 f 100ma v dd = 15 to 30v + 1 3 6 5 4 v o 0.1 f 100ma v dd = 15 to 30v + 1 3 6 5 4
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 12 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin test circuit (continued) figure 22. i ddh test circuit figure 23. i ddl test circuit 1 3 6 5 4 i f = 7 to 16ma v o 0.1 f v dd = 30v + 1 3 6 5 4 v f = -3.0 to 0.8v v o 0.1 f v dd = 30v + +
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 13 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin test circuit (continued) figure 24. i flh test circuit figure 25. v fhl test circuit figure 26. uvlo test circuit 1 3 6 5 4 v o > 5v 0.1 f if v dd = 15 to 30v + 1 3 6 5 4 v f = ?.0 to 0.8v v o 0.1 f v dd = 15 to 30v + + 1 3 6 5 4 v o = 5v 0.1 f 15v or 30v v dd ramp + i f = 10ma
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 14 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin test circuit (continued) figure 27. t phl , t plh , t r and t f test circuit and waveforms figure 28. cmr test circuit and waveforms v o probe f = 10khz dc = 50% i f v out t plh cg = 10nf rg = 10 50 0.1 f v dd = 15 to 30v + + t r t f 90% 50% 10% t phl 1 3 6 5 4 a b v o 0.1 f v dd = 30v v cm = 2,000v i f + 5v + t v cm v o switch at a: i f = 10ma switch at b: i f = 0ma v oh v o v ol 0v + 1 3 6 5 4
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 15 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin ordering information all packages are lead free per jedec: j-std-020b standard. marking information part number package packing method FOD8320 wide body sop 5-pin tube (100 units per tube) FOD8320r2 wide body sop 5-pin tape and reel (1,000 units per reel) FOD8320v wide body sop 5-pin, din en/iec60747-5-5 option tube (100 units per tube) FOD8320r2v wide body sop 5-pin, din en/ iec60747-5-5 option tape and reel (1,000 units per reel) 1 2 8 4 3 5 de?itions 1 fairchild logo 2 device number, e.g., ?320 for FOD8320 3 din en/iec60747-5-5 option (only appears on component ordered with this option) 4 plant code, e.g., ? 5 last digit year code, e.g., ? for 2012 6 two digit work week ranging from ?1 to ?3 7 lot traceability code 8 package assembly code, w 8320 d x yy kk v 6 7 w
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 16 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin re?w pro?e pro?e freature pb-free assembly pro?e temperature min. (tsmin) 150? temperature max. (tsmax) 200? time (t s ) from (tsmin to tsmax) 60?20 seconds ramp-up rate (t l to t p ) 3?/second max. liquidous temperature (t l ) 217? time (t l ) maintained above (t l ) 60?50 seconds peak body package temperature 260? +0? / ?? time (t p ) within 5? of 260? 30 seconds ramp-down rate (t p to t l ) 6?/second max. time 25? to peak temperature 8 minutes max. time (seconds) temperature (?) time 25? to peak 260 240 220 200 180 160 140 120 100 80 60 40 20 0 t l t s t l t p t p ts m a x ts m i n 120 preheat area max. ramp-up rate = 3?/s max. ramp-down rate = 6?/s 240 360
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 17 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin package dimensions package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package speci?ations do not expand the terms of fairchilds worldwide terms and conditions, speci?ally the warranty therein, which covers fairchild products. always visit fairchild semiconductors online packaging area for the most recent package drawings: http://www .f airchildsemi.com/pac kaging/
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 18 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin carrier tape specification (soic-5l opto r2 & r2v option) symbol description dimmension in mm w tape width 24.00 + 0.20 / -0.10 t tape thickness 0.30 ?0.05 po sprocket hole pitch 4.00 ?0.20 do sprocket hole diameter 1.50 + 0.10 / -0.00 d1 pocket hole diameter 1.50 + 0.25 / -0.00 e sprocket hole location 1.75 ?0.10 f pocket location 11.50 ?0.10 p2 2.00 ?0.10 p pocket pitch 8.00 ?0.10 ao pocket dimension 4.50 ?0.10 bo 12.00 ?0.10 ko 3.35 ?0.10 k1 2.85 ?0.10 w1 cover tape width 21.30 ?0.10 d cover tape thickness 0.05 ?0.01 max component rotation or tilt 10 t ko k1 d w1 bo ao do po e w f p p2 d1 user direction of feed
?010 fairchild semiconductor corporation www.fairchildsemi.com FOD8320 rev. 1.0.6 19 FOD8320 ?high noise immunity, 2.5a output current, gate drive optocoupler in optoplanar wide body sop 5-pin

▲Up To Search▲

Price & Availability of FOD8320

	To Download FOD8320 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .